Cementix Plus

Key Benefits

Recommended Applications

• Brickwork and masonry construction for water-resistant walls
• Plastering of internal and external walls prone to dampness
• High-strength pillars and columns requiring corrosion protection
• Precast concrete panels and structural elements
• Foundation concrete exposed to ground moisture
• Basement walls and floors subject to hydrostatic pressure
• Water retaining structures: tanks, swimming pools, reservoirs
• Sewerage works, canals, culverts, and drainage systems
• Bathrooms, kitchens, and wet areas requiring damp-proofing
• Terraces, balconies, and exposed concrete surfaces
• Lift pits, sumps, and below-grade structures
• Any cementitious construction requiring waterproof concrete

Technical Specifications

Application Process

For Concrete Applications

Step 1: Material Preparation
Charge cement and aggregates to the concrete mixer as per the approved mix design. Ensure all materials are clean and free from contaminants.

Step 2: Dry Mixing
Mix the dry ingredients (cement and aggregates) for 2-3 minutes in dry condition to ensure uniform distribution before adding water.

Step 3: Initial Water Addition
Start addition of water into the mix up to 80% of the total quantity required. Mix for 3-4 minutes to achieve initial consistency.

Step 4: Cementmix Plus Addition
Add Cementmix Plus according to the recommended dosage (typically 0.5-1% by weight of cement) into the remaining 20% gauging water. Mix this solution thoroughly.

Step 5: Final Mixing
Add the Cementmix Plus solution to the mixer and mix for another 2-3 minutes to ensure complete distribution. Keep slowly adding the rest of water until the required consistency is obtained. Do not add extra water beyond what is needed.

Step 6: Placement and Finishing
Place the concrete immediately after mixing. Compact and finish as per standard construction practices.

Step 7: Curing
Cure the concrete application as per good construction practices. Proper curing is essential for Cementmix Plus to develop its full waterproofing properties. Maintain moisture for at least 7-14 days.

For Plastering & Mortar Applications

Step 1: Surface Preparation
Ensure the surface is clean, sound, and free from loose materials, dust, grease, or contaminants. Dampen the surface adequately before plastering.

Step 2: Mortar Mix Preparation
Prepare cement-sand mortar mix in the required proportion (typically 1:4 or 1:6 depending on application).

Step 3: Cementmix Plus Addition
Add Cementmix Plus to the gauging water as per recommended dosage before mixing with dry materials. Stir well to ensure uniform distribution.

Step 4: Mixing
Mix the cement-sand mixture with the Cementmix Plus solution thoroughly to achieve uniform consistency. Avoid over-watering.

Step 5: Application
Apply the plaster/mortar to the prepared surface using standard plastering techniques. Ensure proper thickness and uniform application.

Step 6: Finishing and Curing
Finish the surface as required. Cure properly by keeping the surface moist for at least 7 days for optimal waterproofing performance.

Dosage Guidelines

Standard Dosage Recommendations

For Normal Waterproofing: 0.5-0.7% by weight of cement (approximately 500-700 ml per 100 kg cement)

For Enhanced Waterproofing: 0.8-1.0% by weight of cement (approximately 800 ml-1 ltr per 100 kg cement)

For High-Performance Applications: Up to 1.5% by weight of cement for critical waterproofing requirements

Important Notes:
– Always follow the manufacturer’s recommended dosage for your specific application
– Higher dosages should be used for water retaining structures and areas with high hydrostatic pressure
– Do not exceed maximum recommended dosage as it may affect concrete properties
– Dosage may vary based on cement type, aggregate quality, and specific project requirements
– Consult with technical experts for critical or specialized applications

Advantages of Integral Waterproofing with Cementmix Plus

Complete Protection Throughout

Unlike surface coatings that can crack or delaminate, integral waterproofing with Cementmix Plus protects the entire mass of concrete, providing comprehensive protection that cannot be bypassed or damaged by surface wear.

Permanent Solution

The waterproofing properties are built into the concrete itself and last for the lifetime of the structure, eliminating the need for reapplication or maintenance of waterproofing treatments.

Corrosion Inhibition

The specialized corrosion inhibitors in Cementmix Plus protect reinforcement steel from rust and deterioration, significantly extending the service life of reinforced concrete structures and reducing maintenance costs.

Improved Concrete Quality

The plasticizing effect improves concrete workability without increasing water content, resulting in denser, stronger concrete with better durability and reduced permeability.

Prevention of Efflorescence

By blocking water migration through concrete, Cementmix Plus prevents efflorescence (white salt deposits) that commonly appear on concrete and masonry surfaces, maintaining aesthetic appearance.

Reduced Cracking

Improved workability and reduced water demand lead to lower shrinkage and reduced tendency for cracking, further enhancing waterproofing performance.

Cost-Effective Solution

Eliminates the need for expensive surface waterproofing membranes or coatings in many applications, reducing both material and labor costs while providing superior long-term performance.

Versatile Applications

Suitable for a wide range of applications from simple plastering to complex water retaining structures, making it a one-stop solution for waterproofing needs across construction projects.

Easy Integration

Seamlessly integrates into standard construction practices without requiring special equipment, additional labor, or changes to construction schedules.

Proven Performance

Backed by Berger’s scientific research and extensive field testing, Cementmix Plus delivers reliable, consistent waterproofing performance across diverse applications and conditions.

Quality Assurance & Best Practices

Storage Guidelines

Store Cementmix Plus in a cool, dry place away from direct sunlight and heat sources. Keep containers tightly closed when not in use. Protect from freezing temperatures. Use within 12 months of manufacture date for optimal performance.

Mixing Precautions

Always add Cementmix Plus to water, never add water to the product. Ensure thorough mixing to achieve uniform distribution. Do not add extra water beyond the design mix requirement as it will reduce waterproofing effectiveness and concrete strength.

Application Temperature

Apply when ambient temperature is between 10°C and 40°C. Avoid application during extreme weather conditions, heavy rain, or very high temperatures that cause rapid moisture loss.

Quality Control

Use clean, potable water for mixing. Ensure cement, sand, and aggregates meet quality standards. Maintain consistent mixing ratios and dosage throughout the project for uniform results.

Curing Importance

Proper curing is absolutely critical for Cementmix Plus to develop its full waterproofing potential. Inadequate curing will compromise waterproofing performance. Maintain moist conditions for minimum 7 days, preferably 14 days for critical applications.

Compatibility

Cementmix Plus is compatible with all types of Portland cement and most standard admixtures. However, when using multiple admixtures, conduct trials to ensure compatibility and desired performance.

Safety Precautions

Wear appropriate protective equipment including gloves and safety glasses during handling and application. In case of skin contact, wash with soap and water. If product gets into eyes, flush with plenty of water and seek medical attention if irritation persists. Keep out of reach of children.

Why Choose Susmita Paints, Pokhara

• Authentic Berger Home Shield products with genuine warranties
• Expert technical guidance on dosage and application methods
• Professional consultation for waterproofing solutions tailored to your project
• Complete range of pack sizes available (500ml to 20 Ltrs)
• Reliable local service and after-sales support
• Competitive and transparent pricing on construction chemicals
• Access to Berger technical experts for complex waterproofing challenges
• Assistance with product selection and system recommendations
• Connection to experienced contractors familiar with Berger waterproofing systems
• Comprehensive waterproofing solutions beyond just Cementmix Plus